INVERTO Unicable Quad LNB

Inverto Unicable Quad LNB + 2db normál kimenet
Főbb jellemzők:

Low phase Noise HDTV-DVBS2 compliant

Low Noise Figure

Low Power consumption

Very high Cross Polarization Isolation

Very high Frequency stability

2 Legacy ports

User bands:

0 1210 MHz
1 1420 MHz
2 1680 MHz
3 2040 MHz
Technical Specifcations:
Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.7 dB Max.
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 2.5 MHz Max.
Phase Noise (@ 10 kHz) - 90 dBc / Hz Max.
SCR Conversion Gain 57 dB Min.
Legacy Conversion Gain 55 dB Min.
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band) +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Cross Polarization Isolation 22 dB Min.
Output VSWR 2.5 : 1
In-Band Spurious - 60 dBm Max.
Output IF Channel 1 (SCR0) 1210 MHz
Output IF Channel 2 (SCR1) 1420 MHz
Output IF Channel 3 (SCR2) 1680 MHz
Output IF Channel 4 (SCR3) 2040 MHz
Channel Isolation 20 dB Min.
SCR’s Control Signals DiSEqC command extension based on EN-50494
Legacy Switch Voltage Control < 14.2 V (Vertical), > 15 V (Horizontal)
Legacy 22 k Sensitivity 220 mV Min.
Current Consumption 250 mA Max. @ 13.5 V
Operating Temperature - 30 °C ~ + 60 °C
Output Impedance 75
Output Connector F-Type (Female)
Weight 350 g